Top 10 Best Hybrid Table Saws 2019 – 2020 [BUYER’S GUIDE]

1, Grizzly G0771Z – 10″ 2 HP 120V Hybrid Table Saw

This hybrid is a selective blend of the best features of the contractor-style table saw and cabinet style table saw. Like the cabinet saw, it has an enclosed cabinet with 4″ dust port, heavy-duty cast iron trunnions that mount to the cabinet, and plenty of power (with its 2 HP motor) to easily rip through hardwoods or cut dadoes. Like the contractor-style saw, it’s still light enough to move around (it weighs approximately 286 lbs. when fully assembled) and it’s easy on the budget. The fence has the easy lift-off and simple adjustability of the popular T-shape Shop Fox Classic fence, the front locking ability of the Shop Fox Original fence, and the accessory T-slots of the Shop Fox Aluma-Classic fence. To top it all off, this saw features an innovative quick-release blade guard and riving knife system that can be changed in seconds—and it’s prewired to run on an ordinary 120V, 20A circuit! Includes 10″ x 40T carbide-tipped blade. Specifications:Motor: 2 HP, 120V/240V, prewired 120V, single-phase, 60 Hz Amps: 15A@120V, 7.5A@240V Precision-ground cast iron table with wings measures: 40-1/2″ W x 27″ D Table height: 35-3/8″ Footprint: 21″ L x 19-1/2″ W Arbor: 5/8″ Arbor speed: 3450 RPM Max. depth of cut @ 90°: 3-1/4″ Max. depth of cut @ 45°: 2-1/4″ Rip capacity: 31″ right, 16-3/4″ left Overall size: 57-1/4″ W x 35-1/2″ H x 40-1/4″ D Shipping weight: 371 lbs.

2, SawStop CNS175-TGP36 Saw

SawStop Contractor Saw
A Safer Saw
The SawStop 36″ Contractor Saw gives you the reliability and versatility to complete any project. Whether you’re building a deck in your backyard or overhauling your kitchen cabinets, the Contractor Saw will get the job done. It delivers better-than-hybrid performance in the shop with the peace of mind only SawStop’s patented safety system can provide.
The Risk
According to the Consumer Products Safety Commission, there is a table saw injury every 9 minutes, and 10 amputations every day in the United States. Even the most safety-conscious woodworkers are at risk of an accident. And when that accident happens, the consequences are life-changing: extreme pain and trauma, loss of income-earning abilities, and loss of the ability to pursue hobbies. It’s time to protect yourself. SawStop saws have saved thousands of fingers.
Features
Professional T-Glide Fence
The Professional T-Glide Fence System is constructed of the highest quality thick gauge steel. It provides smooth operation, an expansive work surface, precision measurement and sure lockdown without deflection.
Dust Collection
The Centers for Disease Control (CDC) has classified sawdust as a cancer-causing carcinogen. SawStop addresses this safety hazard with the most complete solution available. Under-table shrouding, combined with the optional Dust Collection Blade Guard (TSG-DC) and Dust Collection Port Adapter (CNS-DCP), captures the majority of dust created.
Available Accessory: Overarm Dust Collection. (TSA-ODC)
Versatility
Upgrade your Contractor Saw with two Cast Iron Wings (CNS-CIWA) for a smooth and beautiful fit and finish. The wings align perfectly with the table, rails and extension table, and add 70 more pounds to the saw. This means added stability and reduced vibration for the most precise and accurate results every time.
Mobility Options
Easily move your saw around the shop with the Contractor Saw Integrated Mobile Base (MB-CNS-000). Fully-welded 1/4″ rigid steel construction, two fixed wheels, two 360 deg. casters, and ergonomic one-foot operation that mechanically lifts the saw in a single motion allowing for easy positioning. The Contractor Saw Mobile Cart (MC-CNS) is like an All-Terrain Vehicle for your saw that can be easily rolled up a ramp and over uneven surfaces. It is constructed of sturdy steel, hefty 10″ rubber tires and full ball bearing wheels

3, Delta Power Tools 36-5100

DELTA 10 in. 15 Amp. Left Tilt Contractor Saw with 30 in. RH Rip that includes a tool-free split guard design which allows a true rise-and-fall riving knife by using a lever on the inside of the throat plate
Voltage: Dual Voltage 120V – 240V

Arbor: 5/8 in.

Blade Tilt: 45° Left

Max. Depth of Cut at 90°: 3.5 in.

Max. Depth of Cut at 45°: 2.25 in.

Max. Rip Right of Blade: 30 in.

Max. Rip Left of Blade: 15 in.

Table Size: 20 in. wide X 27 in. deep (50 in. wide X 27 in. deep with WINGS)

Dado Capacity: 13/16 in. X 8 in.

STACKED DADO

Dust Port Size: FIT 2-1/2″ HOSE (WITH 4″ ADAPTER)

Width with Fence: 57 in.

Height: 44 in.

Depth :33 in.

Weight: 260 lbs. Net

4, Shop Fox W1851 Hybrid Cabinet Table Saw

Shop Fox W1851 Hybrid Table Saw
with Extension Table
This Shop Fox Hybrid Table Saw has many safety and convenience innovations that make it stand above all others. Featuring cabinet mounted trunnions, just like a full size cabinet saw, allowing the table and fence to be easily adjusted for absolute parallelism to the blade, dual-position rip fence, quick release blade guard, and riving knife. Offering the best of both contractor style and cabinet style table saws, the W1851 will satisfy any woodworker.
• Motor: 2 HP, 110V/220V, single-phase, TEFC (pre-wired for 220V)
• One-piece cabinet frame with cabinet-mounted cast-iron trunnions
• Built-in dust collection shroud under the blade for all-around efficient dust collection
Dual-position (high-low) extruded-aluminum rip fence
The W1851 fence face can be positioned for standard cutting operations, or placed in lower position for blade guard clearance during narrow ripping operations. yes.
Robust Cabinet Mounted Trunnions
Just like standard cabinet saws, the W1851 trunnions mount to the cabinet for superior performance. The robust cast iron trunnions absorb vibration, ensure proper blade-to-fence and miter slot alignment and make blade height and angle adjustments a breeze.
Blade Tilt
The blade can tilt to the left from anywhere between 0 and 45-degrees. Great for cutting bevels, compound miters or chamfers. Easily adjust your cutting angle by loosening the blade tilt lock and turning the blade tilt handwheel to position the blade at the desired angle, then lock it in place for consistent repeat angled cuts.
Innovative transparent blade guard
with internal airflow channel and dust port
The W1851 features a transparent polycarbonate guard which allows the operator to clearly see the blade cut the workpiece during operation. This guard is designed to ride on top of the workpiece as it is pushed into the cutting zone and remain in contact with the workpiece throughout the entire cut. It also acts as a barrier to shield hands from the blade should kickback occur. The integrated dust collection port and continuous contact between the guard and workpiece aids in efficient dust collection.
Anti-Kickback Mechanisms
The spreader is a metal plate designed to prevent the newly cut kerf of the workpiece from pinching the backside of the blade, to circumvent kickback.
The riving knife works in the same manner as the spreader on the blade guard assembly. The key difference between the spreader and the riving knife is that the riving knife mounts below the blade’s highest point of rotation. The height difference between the riving knife and the blade allows the workpiece to pass over the blade during non-through cuts – where the blade does not cut all the way through the workpiece.

5, Grizzly G0690 Cabinet Table Saw

G0690 10 foot 3HP 220V Cabinet Table Saw with Riving Knife
Destined to be the gold standard for 10 foot left tilting Cabinet Table Saws, this saw will be the focal point in any shop. Every part of this saw says quality and performance. From its heavy cast iron trunnions, 3 HP Leeson motor and triple belt drive to its massive cast iron table and wings, this Table Saw should last a lifetime. You’ll also appreciate its camlock T-fence, riving knife, heavy cast handwheels, magnetic switch, T-slot miter gauge and 4 foot dust collection port. This saw is what dreams are made of! CSA certified meeting CSA C22.2 #71.2-08 and UL 987 standards.
Construction:
Heavy-duty cast iron trunnions, precision-ground cast iron table with miter gauge T-slots, heavy-duty cabinet and powder coated paint.
Riving Knife:
Includes quick release riving knife, quick release blade guard and push stick. The riving knife moves up and down and tilts with the blade.
Fence:
Easy-glide fence system features knurled knobs for adjusting fence with nylon runners. Nylon runners inside fence head assembly.
Specifications and Features:
• Motor: 3 HP, 220V, single-phase Leeson
• Blade tilt: Left
• Table height from floor: 34"
• Table size with extension: 27" x 40"
• Arbor speed: 4300 RPM
• Arbor size: 5/8"
• Maximum dado width: 13/16"
• Maximum depth of cut @ 90°: 3-1/8"
• Maximum depth of cut @ 45°: 2-3/16"
• Maximum rip capacity: 29-1/2"
• Distance from front of table to blade at maximum cut: 12-1/4"
• Distance from front of table to center of blade: 17-1/4"
• Overall dimensions: 62"L x 41"W x 40"H
• Approximate shipping weight: 539 lbs.
• Includes 10" x 40T blade and H3308 Push Stick!
• Leeson motor
• Precision ground cast iron table
• Cast iron trunnions
• 4" dust port
• T-slot miter gauge
• Includes riving knife and blade guard
• Camlock T-fence with HDPE face
• Quick release devise for changing guard/riving knife
• Powder-coated paint
• Includes standard and dado table inserts
• Quick release riving knife
• Quick release motor guard
• Quick release splitter assembly
• Easy-glide fence system
• Knurled knobs for adjusting fence
• Nylon runners inside fence head assembly
• T-square type fence system
• Setscrew holding table insert down, with adjustable screws inside
• A precision hardened and ground polished cast iron top that is, at the very least, equal to the saw you are comparing to

6, Powermatic PM1000 Saw

PM1000, 30″ RIP with Accu-Fence System, 1.75 HP, 1PH
Evolution represents a process that is never fully complete. For a woodworker, inspirations evolve as life experiences shape our creativity. Skills evolve as we share tips and techniques with friends and mentors. And our workshops evolve as we refine our skills. At Powermatic, we’re proud to introduce the latest example of our own evolution, the PM1000 cabinet table saw. As with every product Powermatic builds, the PM1000 redefines the limits of design, innovation and durability.
• Cabinet saw that only requires 115V power
• A blade surround and collection hose provide an unobstructed path, maximizing dust collection
• Conveniently located hands free power switch
• Tool-less guard assembly with independent side leaves is easy to use, maximizing safety
• The sturdy miter gauge pivots 60 degrees to either side, allowing easy adjustment for a full range of cuts

7, Shop Fox W1837 Hybrid Table Saw

Shop Fox W1837 Open-Stand Hybrid Tablesaw
10-inch, 2 HP
With the Shop Fox W1837, you get the best of both worlds. The easy-to-transport weight and size of a high-end contractor saw, but with dust control and the full features of a cabinet saw. Just like the Shop Fox professional cabinet saws, this hybrid also has a quick-change blade guard with anti-kickback pawls that can be positioned away from the workpiece. This saw will surely be the envy of any that see it in a shop or worksite.
Interchangeable true riving knife
The interchangeable true riving knife offers protection for non-through cutting operations that require you to remove the blade guard.
Built-In Mobile Base
The W1837 features a handy built-in kickstand operated mobile base. With a simple push down on the foot levers the machine rises off it’s otherwise stable feet to become mobile so you can easily move it to your new desired location.
Robust Cabinet Mounted Trunnions
Just like standard cabinet saws, the W1837 trunnions mount to the cabinet for superior performance. The robust cast iron trunnions absorb vibration, ensure proper blade-to-fence and miter slot alignment and make blade height and angle adjustments a breeze.
Enclosed cabinet bottom with 4-inch dust port
The enclosed cabinet bottom features a dust chute with a 4-inch port. Keep your work area free of dust and debris when connecting a dust collector with at least 400 CFM available.
Blade Tilt
The blade can tilt to the left from anywhere between 0 and 45-degrees. Great for cutting bevels, compound miters or chamfers. Easily adjust your cutting angle by loosening the blade tilt lock and turning the blade tilt handwheel to position the blade at the desired angle, then lock it in place for consistent repeat angled cuts.
Quick‐Release Blade Guard Assembly
Split design blade guard
The W1837 blade guard assembly consists of important safety features.
The clear guard allows the operator to watch the blade cut the workpiece during operation while maintaining a barrier around the blade that prevents accidental contact and keeps flying wood chips contained.
The spreader/riving knife is a metal plate that prevents the newly cut kerf in the workpiece from pinching the back side of the blade, and otherwise causing potential kickback.
The anti-kickback pawls allow the workpiece to travel in only one direction. If the workpiece moves backwards, such as during a kickback, the pawls will dig into the workpiece to slow or stop it.
• Includes a 10″ x 40-tooth carbide tipped blade, standard and dado table inserts, miter gauge, push stick, and arbor wrenches

8, LAGUNA TOOLS Fusion 36in. Rip 110 V

The Laguna F2 and F3 Table Saws are unlike any saw on the market. Having the same quality demands earned through the original fusion table saw, the new fusion line will not only impress but exceed the expectations you have come to expect from Laguna. With a completely redesigned trunnion and arbor controls that focuses on buttery smooth controls and longevity of the saw, we are sure this is the saw that will give you the perfect rip cut for many many years. Includes: 1.75HP 110V Fusion F2 36 in. RIP – F23611017501.

9, Powermatic 1791230K

Riving knife maintains close blade proximity to reduce chance of kickback
Micro-adjust miter gauge with extension plate offers wider crosscut support
Blade guard and riving knife have quick release for tool-less mounting and removal
Precision ground cast iron table and wings have beveled edge for smooth miter gauge entry
Built-in extraction port increases dust collection efficiency

10, Shop Fox W1851 Hybrid Cabinet Table Saw

SawStop Contractor Saw
A Safer Saw
The SawStop 30″ Contractor Saw gives you the reliability and versatility to complete any project. Whether you’re building a deck in your backyard or overhauling your kitchen cabinets, the Contractor Saw will get the job done. It delivers better-than-hybrid performance in the shop with the peace of mind only SawStop’s patented safety system can provide.
The Risk
According to the Consumer Products Safety Commission, there is a table saw injury every 9 minutes, and 10 amputations every day in the United States. Even the most safety-conscious woodworkers are at risk of an accident. And when that accident happens, the consequences are life-changing: extreme pain and trauma, loss of income-earning abilities, and loss of the ability to pursue hobbies. It’s time to protect yourself. SawStop saws have saved thousands of fingers.
Features
Aluminum Fence
The 30″ Aluminum Fence System provides smooth operation and precision measurement. The fence clamps to the back rail ensuring a tight lockdown without deflection.
Dust Collection
The Centers for Disease Control (CDC) has classified sawdust as a cancer-causing carcinogen. SawStop addresses this safety hazard with the most complete solution available. Under-table shrouding, combined with the optional Dust Collection Blade Guard (TSG-DC) and Dust Collection Port Adapter (CNS-DCP), captures the majority of dust created.
Available Accessory: Overarm Dust Collection (TSA-ODC)
Dust Collection
The Centers for Disease Control (CDC) has classified sawdust as a cancer-causing carcinogen. SawStop addresses this safety hazard with the most complete solution available. Under-table shrouding, combined with the optional Dust Collection Blade Guard (TSG-DC) and Dust Collection Port Adapter (CNS-DCP), captures the majority of dust created.
Available Accessory: Overarm Dust Collection (TSA-ODC)
Mobility Options
Easily move your saw around the shop with the Contractor Saw Integrated Mobile Base (MB-CNS-000). Fully-welded 1/4″ rigid steel construction, two fixed wheels, two 360 deg. casters, and ergonomic one-foot operation that mechanically lifts the saw in a single motion allowing for easy positioning. The Contractor Saw Mobile Cart (MC-CNS) is like an All-Terrain Vehicle for your saw that can be easily rolled up a ramp and over uneven surfaces. It is constructed of sturdy steel, hefty 10″ rubber tires and full ball bearing wheels.

Write a Reply or Comment:

73 + = 81

Back to top
error

Enjoy this blog? Please spread the word :)