Best Multi Process Welders 2019 – 2020 [BUYER’S GUIDE]

Forney 271 Multiprocess Welder

$403.79 CHECK IT OUT

MULTI-PROCESS WELDER- 3 in 1 Stick Welder, MIG Welder and DC TIG Welder (Accessories for TIG Welding not included) everything you need in one machine
EASY TO USE- Easy start makes every strike EASY! Three position switch allows you to change process quickly
CONTROL YOUR WELD- Infinite voltage and wire feed speed controls allows you to dial in the perfect weld. Rated output voltage range- 12 – 23V. Rated output current range- 43 – 110A. Full output curren range- 10 – 140A
RUGGED- All metal case, Built to take the day to day. Big enough to handle 2 and 10 pound rolls of wire. Full metal wire drive assembly
WELDER INCLUDES- 10′ MIG gun, 8′ electrode holder, 8′ ground clamp, Integrated handle with torch wrap, 20A – 15A adapter and one additional .030″” contact tip. Backed by a 12-month warranty
PRODUCT SPECIFICATIONS- Dimensions: 14.19″” (360.47 millimeters) x 19.31″” (490.48 millimeters) x 11.61″” (294.91 millimeters). Weight: 24.81 lbs. (11.25 kilograms). Plate thickness range: Up to 1/4″” (6.35 millimeters). Uses gas or gasless wire up to 0.35 in. and up to 1/8 in. stick electrodes
RECOMMENDED ACCESSORIES- Contact Tips (60170, 60171 and 60172),Welding Nozzles: (85336 and 85337), Diffuser: (85339), Mild Steel MIG Wire: (42285, 42286, 42290 and 42291), Flux Core MIG Wire: (42300 and 42301), Gun/Torch: (85500), Anti-Spatter Spray: (37030), Nozzle Gel: (37031)
Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!

Everlast Power Equipment 2017 Everlast 206Pi 200a PowerUltra Multi-Process Welder

$1,925.00 CHECK IT OUT

verlast PowerPro 256Si 250a AC DC TIG Pulse 60a plasma cutter Multi Process Weld
The Everlast PowerPro 256Si brings maximum power and performance to the table with its newly redesigned IGBT inverter design by featuring digital control. This increases reliability and accuracy. It’s ideally suited for repairs and maintenance chores when space and portability on the job site or repair truck are real concerns
Description:
The welder features up to 250 amps of AC/DC TIG welding power, and a full 200 amps of stick welding power to handle almost any welding project or task. The plasma cutter also supplies up to 60 amps of power to cut or trim up any metal to complete the task and features the longer life PT/iPT 60 torch. The PowerPro series of welders from Everlast are designed for utility use and offer a good value for both hobbyists and professionals who need portable, all-in-one welding and cutting capability.
Includes:
Standard Equipment: 12 ft. Everlast Series-18 water-cooled TIG torch with DINSE 35 style connectors Stick electrode holder with 10 ft cable and DINSE 35 style connectors 15 ft. iPT 60 Plasma torch with DINSE 35 style connectors Work clamp with 10 ft. cables and DINSE 35 style connectors Argon Regulator for TIG Air pressure regulator for plasma with built in water trap (An extra inline air dryer supplied by the customer is recommended to prevent rapid consumable wear and torch damage) Everlast Foot pedal Consumable starter kits for TIG and plasma. (Tungsten not included for TIG).

Lincoln Electric Power MIG 210 MP Multi-Process Welder

$1,723.00 CHECK IT OUT

The POWER MIG 210 MP power supply is a multi-process welder for the hobbyist, educator or small contractor who wants to do MIG welding and a lot more, including stick, TIG and flux-cored welding. The push-and-turn digital controls and color display screen make setup and operation intuitive and easy, while the all-metal wire drive and sturdy sheet-metal construction make it rugged and ready for any job in the home or small shop. The POWER MIG 210 MP power supply is the ideal MIG machine for the welding novice, with plenty of room to grow as you gain more experience.

Everlast Power Equipment 2015 Everlast PowerPro 164 Multi-Process Welder

CHECK IT OUT

Features & Benefits – All-in-one portability – Compact, yet powerful TIG welding/Plasma cutting features – Easy to use controls with simple selector switch for process changeover – Quick change out of torches for easy change from TIG to plasma back to TIG – Low power consumption due to inverter design – High duty cycle at rated amperages for TIG/Stick/Plasma – Over Current indicator warns when duty cycle has been exceeded – OK to cut indicator lights when air pressure meets minimum required operating pressure – Clean and smooth plasma cuts on virtually any metal – Weld almost any metal – Exceptional arc stability for TIG/Stick functions NOTE: For use with generators, this welder requires a MINIMUM of 10,000 watts of continuous output and be designated as “clean power” by the generator manufacturer. For best results, a higher output generator may be required. Use with generators not designated by the generator manufacturer as a “clean” power source may void warranty.

Forney 324 120/230-Volt Multi-Process Welder

$403.79 CHECK IT OUT

Forney Easy Weld 140 MP Welder
The Forney Easy Weld 140 MP is a multi-process welder that can easily be switched between MIG, DC TIG and Stick welding. This unit is built tough with an all-metal case and metal wire drive assembly. The Forney Easy Weld 140 MP is big enough to handle two and ten pound rolls of wire, and features infinite voltage and wire feed speed controls to help dial in the perfect weld. With this welder, you can use gas or gasless wire up to .035”, and up to 1/8” stick electrodes
Recommended Accessories:
• Contact Tips: (60170, 60171 and 60172)
• Welding Nozzles: (85336 and 85337),
• Diffuser: (85339)
• Mild Steel MIG Wire: (42285, 42286, 42290 and 42291)
• Flux Core MIG Wire: (42300 and 42301)
MIG Welding
This machine is set up to do flux-core welding but can easily be switched to run Mild Steel with gas set up. At 140 amps, you can weld up to ¼” mild steel in a single pass. Regulator and hose sold separately.
DC TIG Welding
The 3-in-1 nature of this machine makes it capable of DC TIG welding. To use this process, you will need to purchase the appropriate torch, regulator, hose, tungsten electrodes and gas separately.
Stick Welding
The Forney Easy Weld 140 MP can easily run stick electrodes. A stinger and ground clamp are included with your machine for this process. This unit can weld with electrodes up to 1/8” (aside from the E7018 electrode).

Everlast Power Equipment 2017 251Si Everlast PowerMTS Multi-Process Welder

$1,699.00 CHECK IT OUT

Everlast PowerMTS 251Si Pulse MIG TIG Stick 250amp 110v/220v Multi Process Welde
• Digital IGBT Inverter construction, MIG/DC TIG/Stick/Spool Gun ready
• Pulse MIG/Syn MIG /// Pulse TIG function, Adjustable MIG/Stick Arc Force
• Dual Voltage 120/240V . HF and Lift Start for TIG , Dual Voltage 120/240V
• 030″-.045″ Wire diameter / 35% Duty Cycle @ 250 Amps / Save up to 9 programs
The compact PowerMTS 251Si is one of the fourth generation of digitally controlled multi-process inverter welders from Everlast. Taking our customer’s feedback into consideration from previous models, the all new PowerMTS 251SI is designed to be as versatile as ever with not only standard DC MIG, TIG and Stick welding capability but also with Synergic MIG, Pulse MIG, and Pulse TIG welding modes. This new welder is a leader in the compact multi-process welder class as both pulse MIG and pulse TIG features are not available from any other manufacturer. Additionally, the PowerMTS 251Si offers one more distinctive feature: it allows to the operator to choose from a touchless, high frequency start or a lift start in TIG mode. The stick mode offers more adjustability than ever with the addition of hot start intensity and hot start duration controls.
Includes:
12 ft. Everlast 26 Series TIG torch with series 35 DINSE-style connector.
10 ft. Series 24 MIG torch with Euro style quick connect fitting.
Stick electrode holder with 10 ft. cable and 35 series DINSE-style connector.
Work clamp with cable 10 ft. cable and 35 series DINSE-style connector.
Spare consumable starter kit. (does not include tungsten)
Foot Pedal.
Argon Regulator.

Write a Reply or Comment:

45 − 39 =

Back to top
error

Enjoy this blog? Please spread the word :)