Top 10 Best Portable Table Saws 2019 – 2020 [BUYER’S GUIDE]

1, DEWALT DW745 Compact Job-Site Table Saw

DW745S / 10 in. Compact Jobsite Table Saw with Stand
The DW745S 10 in. compact job site table saw offers performance and durability in a portable size. The saw features a 15 Amp, 1850 RPM motor, tool-free guarding component adjustments, fast, accurate fence adjustments, and a 20 in. rip capacity to handle large materials. Compact metal scissor stand included is both lightweight and durable designed for quick setup and breakdown.
Features
• Rack and pinion fence rails make fence adjustments fast, smooth, and accurate
• 20 in. of rip easily cuts a variety of larger shelving and trim materials
• Telescoping fence rails retract to create a small, portable package
• Shoe bevels 0° to 45° for beveled cuts
• Site-Pro Modular Guarding System allows for tool free adjustments of the guarding components appropriate for each application
• On-board storage provides easy access to the Site-Pro guarding components and push stick when not in use
• Adjustable rear feet designed to level the saw on uneven work surfaces
• 24T carbide blade enhances cut quality and prolongs blade life

2, Shop Fox W1819 3 HP 10-Inch Table Saw

Shop Fox W1819 3 HP 10-Inch Table Saw
with Riving Knife
Every part of this saw says quality and performance. From the heavy cast iron trunnions, 3 HP Leeson motor and triple belt drive to the massive cast iron table and wings, this table saw is built to last a lifetime. You”ll also appreciate the camlock T-fence, riving knife, heavy cast handwheels, magnetic switch, T-slot miter gauge with fence extension and flip stop and 4-inch dust collection port. A true riving knife follows the up and down and tilt movement of the blade. Features a 29-1/2-inches rip capacity.
Safety Features
The W1819 features a blade guard assembly which consists of a clear polycarbonate shield, the spreader, and the anti-kickback pawls on each side of the spreader.
Guard, Spreader, Anti-Kickback Pawls
The clear polycarbonate guard allows the operator to see the blade cut the workpiece during operation. This guard is designed to lift as the workpiece is pushed into the blade and remain in contact with the workpiece throughout the entire cut.
The spreader is a metal plate that prevents the newly cut kerf of the workpiece from pinching the backside of the blade, causing kickback.
The anti-kickback pawls allow the workpiece to travel in only one direction. If the workpiece moves backwards, such as during a kickback, the pawls will dig into the workpiece to slow or stop it.
Miter Fence
with Flip Stop
The W1819 features a miter fence with flip stop. This miter fence provides greater workpiece support than the miter gauge alone, and is ideal for longer workpieces.
The flip stop comes in handy when making multiple cuts of the same width. It can be pivoted (flipped) out of the way to allow longer workpieces to be cut, and pivoted back down to make additional cuts at your desired cutting width.
Blade Tilt
This saw allows the operator to tilt the blade to the left anywhere between 0 and 45-degrees. Great for cutting bevels, compound miters or chamfers. Easily adjust your cutting angle by loosening the the blade tilt lock and turning the blade tilt handwheel to position the blade at the desired angle.
Riving Knife
The riving knife works in the same manner as the spreader on the blade guard assembly. It is a metal plate that prevents the newly cut workpiece from pinching the backside of the blade and causing kickback.
Product Information
W1819
The Shop Fox W1819 table saw measures 40 by 45-1/2 by 62-inch overall (HxWxD), has a floor-to-table height of 34-inch, and has an approximate shipping weight of 539 pounds. The table measures 27 by 40-1/4-inch (W x D) and 27 by 53-5/8-inch with the extension.
• Footprint: 22-1/4 x 20-inch
• Optional Mobile Base: Shop Fox Model D2057A

3, SKIL 3410-02 10-Inch Table Saw

SKIL 3410-02 10-Inch Table Saw
Ideal for DIY woodworkers looking to tackle bigger projects in and around the house, the 3410 SKIL Table Saw is an essential tool. Rip long boards to width, cross cut smaller pieces, miter or bevel – this powerful table saw features 3-1/2-inch cut height capacity to slice through 4X the material. The 20 x 26-inch cast aluminum table supports your work, and the self-aligning rip fence and EZ View measurement system help you achieve accurate cuts. The 3410 Table Saw sets up fast with the Quick-Mount system on a heavy-duty steel stand.
Includes
(1) 10-Inch Table Saw, (1) Carbide-Tooth Blade, (2) Blade Wrenches, (1) Heavy-Duty Steel Folding Stand, (1) Self-Aligning Rip Fence, (1) Miter Gauge
15 Amp Motor
A 15 amp motor is perfect for ripping through all varieties of wood.
Heavy-Duty Steel Folding Stand with Quick-Mount
Includes a durable steel folding stand with quick-mount that makes setup quick and easy, and storage convenient.
3-1/2-Inch Cut Height Capacity
The 3-1/2-inch cut height can cut through 4x the material in one pass, providing the cutting capacity necessary for tackling various carpentry and woodworking projects.
EZ View Measurement System
An EZ view measurement system and self-aligning rip fence ensure accurate settings and measurements.

4, DEWALT DWE7491RS Jobsite Table Saw

Functionality and Portability
The DEWALT DWE7491RS 10-inch Jobsite Table Saw with 32-1/2 inch (82.5cm) Rip Capacity and a Rolling Stand features a rack & pinion fence system which makes fence adjustments fast, smooth and accurate. The 32-1/2 inch rip capacity easily cuts a variety of larger shelving and trim materials – the patented material support allows this to be used for narrow rip cuts. This unit features a 15 amp motor which quickly rips through hardwoods with ease. The telescoping fence rails easily extend and retract to create a small portable package and the flip-over ripping fence allows for narrow rip cuts.
This saw offers 3-1/8 inch depth of cut at 90 degrees and 2-1/4 inch at 45 degrees. A 2-inch dust collection port easily connects to a vacuum for efficient dust extraction to keep clean up at a minimum. The rolling stand is designed for easy set up and breakdown with excellent stability, and features large heavy duty wheels that easily roll over steps, curbs, and jobsite debris. The 26-1/4 inch X 22 inch table provides superior material support. This unit features an on-board storage system which provides easy access to the Site-Pro Guard components and push stick when not in use.
Common Applications
• Cabinet Installers: ripping filler boards.
• Hardwood Floor Installers; ripping floor boards.
• Trim Carpenters: ripping moldings, wainscoting, ripping and cross cutting 1X material for framing book shelves and entertainment centers, ripping framing lumber.
• Deck Builders: ripping deck boards, rail cap, railing.
• Remodelers: ripping framing lumber, sheet material (4 feet X 8 feet).
• Serious Woodworkers: home hobbyists, ripping sheet material (4 feet X 8 feet), framing lumber, (2-inch X 12-inch), sizing material up to 3-inches thick, ripping and cross cutting 1X material used for dados, rabbets, mortise and tenons.

5, Bosch 10-Inch Worksite Table Saw

Bosch 10-Inch Worksite Table Saw (4100-10)
The Bosch 4100-10 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand delivers both professional rip capacity and outstanding portability for a tool that can get the job done, wherever it is. The powerful 15-Amp saw delivers 4.0 max HP for outstanding productivity. It also incorporates soft-start circuitry for smooth but quick ramp-up to the operating speed to manage the intensity of motor start-up and minimize the possibility of tripping a circuit breaker. It includes Constant Response circuitry to help maintain speed under load, and overload protection.
Portable
Innovative, gravity-rise, collapsible table saw stand allows you to adjust height to meet your specific needs while the 8-inch treaded pneumatic wheels provide mobility from jobsite to jobsite.
Efficient
Featuring SquareLock rip fence engineered to increase cutting trueness and allowing for one-handed operation as you glide along the rail as well as riving knife and anti-kickback pawls for protection when a kickback occurs.
Capacity
Bosch 4100-10 inch table saw features a larger cutting table surface area and ripping capacity handling stock up to 25 inches wide.
Precision
Bosch 4100-10 worksite table saw provides high-precision cutting as well as efficient power with 3,650 no load RPM motor.

6, Bosch 10-Inch Portable Jobsite Table Saw GTS1031

GTS1031 10-Inch Portable Jobsite Table Saw
The Bosch GTS1031 10-Inch Portable Jobsite Table Saw provides ultimate portability and durability in one package – providing a balanced one-handed carry handle and an all-steel and lightweight base. The saw comes equipped with Bosch’s innovative Smart Guard System modular blade guard and a SquareLock rip fence for outstanding trueness. This table saw allows users to deliver their cuts faster. The table includes on-tool storage under the table, storing all the accessories.
Includes
(1) table saw, (1) 24-tooth carbide saw blade, (1) rip fence, (1) miter gauge, (1) push stick, (2) blade-change wrenches
Jobsite mobility and balance
The Bosch GTS1031 Jobsite Table Saw was designed for mobility, thanks to its single-handle carry design for a well-balanced lift zone. The ergonomic soft-grip handle and optimized center of gravity help make transporting this 52 lbs. saw easy. It has dual-side handles that are positioned to make it easier to load the saw into a truck or set up on a stand or work platform. The base stacks on the side for transport and stable storage.
Tough build, generous storage
The table saw features a unique base built to take jobsite abuse. The all-steel base is durable and helps the saw to hold up against impacts and other heavy-duty job conditions. This lightweight base comes with rubber feet to help give it great stability when in use. It offers on-tool stowing under table, storing the SquareLock rip fence, Smart Guard System, miter gauge, push stick and wrenches under table for protection during transport and storage.
True cuts for reliable output
The SquareLock Rip Fence helps to decrease waste by increasing cutting trueness and maximizing output. With auxiliary fence slots and a T-slot miter gauge, this fence has been designed to be the best and most accurate in the business. It is able to easily glide along the rail for easy one-handed operation and quick locking into place. The riving knife prevents material from pinching the blade and offers positions for full upright, splitting and non-thru cutting.
Smart guard saves time
The Smart Guard System modular blade guard attaches and detaches in mere seconds. The rawls and riving knife provide superior control over the material while cutting. The 20-Inch x 22-1/2-Inch portable tabletop has an 18-Inch rip capacity, taking on larger stock or sheet good. It has a 4.0 HP, 5,000 no-load rpm motor and a 5/8-Inch arbor size. It has a tool-free dust chute clear-out on the back of saw for easy maintenance.

7, DEWALT DWE7480XA 10 in. Portable Table Saw

DEWALT 10-Inch Compact Job Site Table Saw
Includes Guarding System and Stand
The DWE7480 10 inch Compact Job Site Table Saw with Site-Pro Modular Guarding System has a 15 Amp motor and 24 inch rip capacity to allow cutting of large and hardwood materials. Features tool-free guarding component adjustments and fast, accurate fence adjustments. Compact and lightweight with a metal roll cage for jobsite durability.
Features
• Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate.
• Site-Pro Modular Guarding System allows for tool free adjustments of the guarding components appropriate for each application.
• Onboard storage provides easy access to the Site-Pro Guarding components and push stick when not in use.
• Blade can be adjusted 0 – 45 degrees for bevel applications.
• Adjustable rear feet designed to level the saw on uneven work surfaces.
• 24T carbide blade enhances cut quality and prolongs blade life.
• 24 inch of rip capacity, easily cuts a variety of larger shelving and trim materials.
• 15 amp 4800 rpm motor quickly rips through hardwoods with ease.
• Metal roll cage base offers greater durability than plastic bases.
• Weighing only 48 lbs, the DWE7480 can easily be moved on and off the job.
• Dust port allows for 2-1/2 inch vacuum hook up and minimizes clean up.
• Table coating reduces friction for smoother cutting.

8, SKILSAW SPT70WT-01 Worm Drive Table Saw

10 In. Worm Drive Table Saw
SPT70WT-01
Introducing the world’s first Worm Drive table saw, the SPT70WT-01 is designed for ripping. SKILSAW’s legendary Worm Drive gearing provides maximum torque and power for ripping through materials without bogging down. The SPT70WT-01 features a best-in-class 15-amp Dual-Field Motor that powers and keeps the motor cool through continuous cuts. Rip full sheets of plywood and up to a 4x of material as the saw features a 25 in. rip capacity and a 3-1/2 inch depth of cut. Make accurate cuts with self-aligning rip fence and easy to adjust bevel that goes from -1° to 46° for true cutting.
Included with the SPT70WT-01 is 24-tooth SKILSAW Carbide-tipped blade for ripping, miter gauge, self-aligning fence, guard system including anti-kick back device, insert plate, push stick and wrench.
Legendary gearing
The power and feel of a hand-held worm drive saw is now in a table saw. Worm drive gearing paired with 25 inch rip capacity and 3-1/2 inch depth of cut creates the ultimate ripping machine. The first and only worm drive table saw on the market that features a powerful 15-amp motor and a no-load RPM of 5,300.
Rugged durability
Constructed to withstand the demands of a jobsite the table saw has a durable all-steel roll cage and a die cast aluminum top. The mechanisms that raise and lower the blade are made from metal to withstand extreme temperatures without breaking.
Convenient on-tool features
Protect the accessories that help make the truest cut with on-tool storage. The self-aligning rip fence and other included table saw accessories can be slid or clipped into place underneath the saw. Easily connect table saw to a vacuum through back port for sawdust cleanup while cutting.
Lighweight portablity
The 49 lb. table saw is lightweight for easy portability from truck to jobsite. Users can pick up the saw with one-hand using its rubberized padded handle leaving the other hand free to carry other tools or the stand, SPTA70WT-ST (sold separately).

9, Makita 2705 10-Inch Contractor Table Saw

Makita 2705 10″ Table Saw
Precision Machined Table Top for Accurate Cuts
Makita’s 2705 10 in. Table Saw is a versatile and powerful table saw for use in the shop or on the jobsite. It combines a range of convenience and ease-of-use features with large capacity and 15 Amp power, making it a true best-in-class table saw for a range of professional applications.
15 Amp Motor
It delivers 4,800 RPM, with an electric brake for maximum productivity. The large cutting capacity (3-5/8 in. at 90° and 2-1/2 in. at 45°) can rip 4X material in one pass, and can use up to a 6 in. x 13/16 in. dado blade.
The 2705 is engineered for remodelers, furniture makers, finish carpenters, cabinet installers, decking and flooring contractors, and general contractors seeking a best-in-class 10 in. table saw for the jobsite or on the benchtop.
Features
• Guard design allows operator to view the blade as it contacts the material
• Blade guard assembly with cam lock provides easy “tool-less” installation or removal
• Saw blade enclosed underneath the table to protect the blade during transport
• Dead-on cam-locking rip fence and bevel locking handle for fast and easy adjustments

10, Kreg KMS7102 Table Saw

Precision Miter Gauge System
Why spend your time calibrating a miter gauge when you can get amazing accuracy right out of the box? Our Precision Miter Gauge System requires no calibrating, and features positive stops at 0°, 10°, 22½°, 30° and 45° to make it easy to cut accurate miters quickly.
Of course, when you do want to cut a more complicated angle, the easy-to-use Vernier scale allows for fast adjustments to 1/10th of a degree.
Plus, the Precision Miter Gauge System offers a long, anodized-aluminum fence and stop system that let you easily make accurate, repeatable cuts.
One Miter Gauge with Everything You Need for Accuracy
Perfect Miters, Fast!
We worked to build accuracy into every feature of this product, from the rugged aluminum fence to the solid yet versatile Swing Stop, to the easy-to-use yet amazingly accurate Vernier scale. With all of its great features, this miter gauge will give you better, more accurate cuts to ensure project success.
Precision Lens Cursor
Similar to the type of lens found on a quality table saw rip fence, the clear lens features a high-visibility red line that makes it easy to set the Swing Stop for precise cuts, time after time.
No Play in the Miter Slot
Our extremely straight 24″ (610mm) anodized-aluminum bar is 3/8″ (9.5mm) thick by 3/4″ (19mm) wide and features five bar adjusters that you can use to eliminate ‘play’ in the miter slot with the turn of a screwdriver.
Swing Stop
The Swing Stop slides effortlessly along the fence of the Precision Miter Gauge and locks securely into place with the turn of a knob. It also features a curved foot that lets you easily swing the stop temporarily out of the way without having to remove it.

Write a Reply or Comment:

8 + 1 =

Back to top
error

Enjoy this blog? Please spread the word :)