Top 10 Best Tile Saws 2019 – 2020 [BUYER’S GUIDE]

1, SKIL 3550-02 7-Inch Wet Tile Saw

Chain Saw, Fuel Type Gas, Bar Length 18 In. , Engine Displacement 40. 2cc, Auto/Aadjustable Chain Oiler, Anti Vibration Handle Yes, Fuel Tank Capacity 13. 9 oz. , Replacement Chain MFR. NO. 91VG62CQ, Includes Chain Saw, Bar, Chain, 2 Stroke Oil, Operators Manual
SKIL 3550-02 7-Inch Wet Tile Saw with HydroLock Water Containment System
Whether you’re updating or renovating, adding tile to your kitchen or bathroom is now easier than ever with the SKIL 7-inch Wet Tile Saw (3550). The saw’s innovative HydroLock System keeps water splash to a minimum so tiles can be cut in the room where they’re being installed. You no longer need to go back and forth to a saw set up in the garage or outside to cut the tiles, so the SKIL tile saw with HydroLock System helps you finish the project faster too! The 3550 works with a 7-inch continuous rim diamond blade, which provides efficient and even cutting. It also comes equipped with a durable rust-resistant aluminum table top and a sliding side extension that can be used to support tiles up to 18 x 18-inch.
Whether you’re updating or renovating, adding tile to your kitchen or bathroom is now easier than ever with the SKIL 7-inch Wet Tile Saw (3550). The saw’s innovative HydroLock System keeps water splash to a minimum so tiles can be cut in the room where they’re being installed. You no longer need to go back and forth to a saw set up in the garage or outside to cut the tiles, so the SKIL tile saw with HydroLock System helps you finish the project faster too! The 3550 works with a 7-inch continuous rim diamond blade, which provides efficient and even cutting. It also comes equipped with a durable rust-resistant aluminum table top and a sliding side extension that can be used to support tiles up to 18 x 18-inch.

2, Lackmond Beast Wet Tile Saw

The BEAST5 Wet Tile / Stone Saw is designed and engineered as a joint venture with Lackmond Products and Delta. It is capable of executing a diagonal cut or rip cut on virtually any size of tile or stone. The integrated plunge cut feature provides up to 1-1/4″ depth of cut at 90Degree and an impressive 1″ when in the 45Degree bevel position. Our high strength rip fence ensures accurate rip cuts over long tiles, and can be reversed to allow precise depth control when working on a flat surface. The 12 AMP motor makes the BEAST5 one of the most powerful saws in its class – easily capable of cutting through hard 3 cm thick granite slabs. Our one-piece gear box / handle assembly provides increased strength and allows for incredible cutting accuracy. The BEAST5 is designed to accept both concave and standard blades and is an essential tool for any tile or stone contractor.

3, SKIL 3540-02 7-Inch Wet Tile Saw

SKIL 3540-02 120-Volt 4.2 Amp 7-Inch Wet Tile Saw
With more and more homeowners tackling renovations on their own and looking for quality tools on a budget , the SKIL 3540-02 120-Volt 4.2 Amp 7-inch Wet Tile Saw is perfect to use for replacing or installing various tile floors.
Stainless Steel Table Top
A stainless steel table top will resist corrosion after multiple uses.
Adjustable Rip Fence with Miter Gauge
The adjustable rip fence with miter gauge will allow you to make accurate and straight miter cuts.
Bevel Cuts Tile From 0 to 45 Degrees
For a more intricate design or to tackle those end pieces, the 0-45 degree bevel will provide flexibility for various cut types.
Blade Cooling Water Reservoir
The blade cooling reservoir not only is a safety feature because it keeps the blade from heating up, but the constant flow of water will help minimize the dust and debris while cutting the tile.

4, DEWALT D24000S

DEWALT D24000S Heavy-Duty 10-inch Wet Tile Saw with Stand
The 69-pound D24000S 10″ Wet Tile Saw allows a one person set up and transport.
Stainless steel rail system is integrated into the tile saw frame, insuring accurate cuts. Rear and side water attachments can be placed on tile saw to catch over-spray from large tile to keep the water in the pan.
The D24000S includes a 10″ Wet Tile Saw with a stand that folds for easy transporting and storage.
The stand holds the 69-pound Wet Tile Saw and provides an ideal work space.
• Cutting capacity to rip cut 25 inch or 28 inch with a plunge and cut 18 inch x 18 inch tile on a diagonal. Cut line indicator and stainless steel rollers provide stable, accurate cutting to within 1/32 inch over 18 inch cuts
• Weighing only 69 pounds, one person can transport and set up
• 45 or 22.5 degree miter feature for quick angled cuts with dual water nozzles. Compact saw frame allows for easy transport and storage in vehicle – 34 inch x 26 inch
• Plunge feature allows user to make quick plunge cuts for electrical outlets and A/C registers
• This product ships in two boxes and includes the D24000 saw and the D24001 stand

5, QEP 22650Q Tile Saw

The QEP 650XT 3/4 HP 120-Volt Wet Tile Saw features a powerful 3/4 HP motor that generates up to 3,600 RPM to cut ceramic tile, porcelain tile, marble, granite and stone. Its 7 in. continuous rim diamond blade is positioned for cutting depths up to 1-1/4 in. and the table tilts for 22.5-degree and 45-degree miter cuts. The saws durable steel table and frame have rubber foot pads for stability and its rip and angle cutting guides make accurate and repeat cuts easy. The water recirculation system and reservoir are designed to help keep your work area dry.

6, DEWALT DWC860W Masonry Saw

DEWALT DWC860W 4-3/8-Inch Wet/Dry Masonry Saw
The DWC860W 4-3/8″ Wet/Dry Handheld Tile cutter has a powerful 10.8 Amp motor to deliver power for cutting through granite, porcelain, marble and glass, yet it is lightweight and compact to reduce user fatigue. The DWC860W is ideal for back splash, threshold and plank and large format tile work. The flow adjustable water connection keeps the blade and material cool while helping to reduce water puddles in the work area.
Features
• Powerful 10.8 amp motor delivers the cutting power to cut through granite, porcelain, concrete, and other stone materials.
• Lightweight and compact
• Premium 4-3/8″ diamond Blade allows the user to cut ceramics and stone materials up to 1 3/8′ deep wet or dry
• 13,000 rpm max with no-load speed provides plenty of speed to complete the user applications.
• Bevels to 45 degrees for quick and precise angle cuts
• 12′ water line feeds water to the blade decreasing dust and increasing blade performance and life
• Lock-on button reduces user fatigue during production cuts
• Adjustable depth-of-cut allows users to cut at various depths
• Dust-sealed switch protects the unit from contamination and prolongs the life of the unit
• Rubber overmold grip provides increased user comfort and ergonomics

7, PORTER-CABLE PCE980

PORTER-CABLE PCE980 7 in. Table Top Wet Tile Saw features a powerful 1.0 Horsepower motor providing smooth cutting of porcelain, ceramic and Stone tiles. Cast-metal cutting cart delivers 17 in. Cutting capacity, allowing cutting of 12 in. X 12 in. Tile on a Diagonal. Get accuracy of 1/16 in. On cuts up to 12 in. Long. The Pce980 includes Pce980 7 in. Wet tile saw, 7 in. Porcelain tile blade, Miter square, blade wrench. Includes 3 year limited warranty, 1 year free service contract, and 90 day money back guarantee.

8, MK-370EXP Wet Cutting Tile Saw

The light weight and portable MK-370EXP Tile Saw is made to the highest professional specifications.  If features a built in adjustable 45 degree cutting head that allows for quick and accurate miter cuts.  The high torque motor efficiently cuts tile up to 18 and will diagonally cut a 13 tile.
• Lightweight and portable tile saw is made to the highest professional specifications
• Hinged blade guard for easy blade changes and maintenance inspection
• Built in 45° miter system
• Plunge capability makes cutting outlets and other openings quick and easy
• The 5/8-Inch diameter chrome-plated linear guide bar provides smooth, straight, ridgid support for precision cutting

9, Makita 4100NHX1 Tile Saw

The Makita 4-3/8” Masonry Saw with 4” diamond blade (model 4100NHX1) is a powerful cutting solution that is ideal for a range of applications including stone, tile, and concrete. The 4-3/8” Masonry Saw is powered by a 12 AMP motor, with 13,000 RPM and a cutting capacity of 1-3/8”. Convenience features include a lock-off button, and a flat rear side motor housing that allows for easy blade changes. The saw weighs only 6.5 lbs. for improved operator comfort.

The 4100NHX1 also includes two Makita 4” Diamond Blades with turbo rim, engineered for constant contact with material for a smoother cut and finish.

10, QEP 10600BR Tile Cutter

Tile Cutter, 1/2 In. Capacity, Size 24 In. , Color Gray/Black, Construction Wide Die Cast Aluminum Alloy Base, Bicycle Grip Handle, Characteristics Rubber Pad, Dual Chrome Plated Rail Bars, Height Adjustable 4-Position Wheel, Linear Ball Bearing Slides, Side Arm Extensions, Adjustable Rip Guide With Both Standard And Metric Measurements To Make Multiple Rip And Diagonal Cuts, For Cutting Wall And Floor Tile Up To 24 In. Square, 18 In. Diagonally, Includes 7/8 In. Tungsten Carbide Cutting Wheels

Write a Reply or Comment:

46 − 40 =

Back to top
error

Enjoy this blog? Please spread the word :)