Top 5 Best TV Wall Mounts 2019 – 2020 [BUYER’S GUIDE]

Sanus VLT6-B1

CHECK IT OUT

The SANUS VLT6 Advanced Tilt Premium TV Wall Mount features a revolutionary design, providing 5.7” of extension on a tilting mount. The extension allows even the largest of TVs to achieve the maximum listed tilt range*. Large TVs installed on traditional tilting mounts often hit the wall, limiting the maximum tilt that can be achieved. The VLT6 solves this issue by extending from the wall, offering TVs a larger tilt range. More tilt translates to better glare reduction. This makes the VLT6 the go-to tilting mount for all above-eye-level mounting locations, like over the fireplace. Additionally, because the mount can extend the TV 5.7” from the wall, cables and wires can be accessed quickly and easily while the TV is still mounted. This makes the initial hook-up and future device switches a quick and easy process.
An open wall plate design allows the VLT6 can be mounted directly over electrical outlets for a super clean installation. And centering the TV, even with off-center studs, is no longer an issue due to the side-to-side shift. Post-installation height and level adjustments make fine-tuning quick and easy for a perfectly level TV. The ability to padlock the TV to the mount for additional safety or security means this can be used in private or public settings without worry. Compatibility with the SASP1 streaming device panel means that even streaming devices can be hidden behind the TV for the ultimate installation.
• The SANUS VLT6 Advanced Tilt Premium TV Wall Mount features a revolutionary design, providing 5.7” of extension on a tilting mount.
• The extension allows even the largest of TVs to achieve the maximum listed tilt range.
• Large TVs installed on traditional tilting mounts often hit the wall, limiting the maximum tilt that can be achieved. The VLT6 solves this issue by extending from the wall, offering TVs a larger tilt range. More tilt translates to better glare reduction.
• An open wall plate design allows the VLT6 can be mounted directly over electrical outlets for a super clean installation.
• Compatible with most 46″”-90″” flat panel TVs up to 150 lbs.

Mounting Dream MD2380

CHECK IT OUT

Fits 32-55″ TVs

This TV mount fits most of 32-55″ TVs sold today. TV wall mount fits TVs with mounting holes as close as 3″X3″ or as wide as 16″x16″. Specifically, TV bracket fits VESA 75X75mm, 100X100mm, 200X100mm, 200X150mm, 200X200mm, 300X200mm, 300X300mm, 400X200mm, 400X300mm, 400X400mm.

Retracts 3″ low profile, Extends 15.2″ from the wall, Tilt, Swivel and Rotate function

With articulating arm, this TV mount retracts to 3″(to wall) to save space, and extends up to 15.2″ from the wall. +5°/-15° Tilt, +/-45°Swivel and +/-3° rotation for maximum viewing flexibility.

Heavy duty steel construction, 99 LBS loading capacity

Constructed with heavy duty steel materials with durable powder coated finish. This TV wall mount TV bracket is 100% welded by automatic robot. This advanced welding technology makes the mount sturdy, and ensures mounted TV stable and secure, supporting TV weight up to 99 LBS.

Bubble level, 9′ high speed HDMI cable and cable ties

TV wall mounts come with bubble level and 9′ HDMI cable. HDMI cable supports 3D, Ethernet, 1440P and Audio Return conforming to latest HDMI 1.4 Standard. 3 cable ties for cable management.

Includes all necessary mounting hardware

This TV bracket ships with hardware for both wall and TV mounting but concrete anchors are not included. Please tell us to ship out if needed. All our TV wall mounts are NOT for dry wall alone application!

VideoSecu ML531BE

CHECK IT OUT

The VideoSecu articulating mount is a mounting solution for 25″- 42″, some models up to 55 inch (Please check VESA and Weight). The TV mount fit VESA 200x200mm/200×100/100×100 (8″x8″/8″x4″/4″x4″). This wall mount comes with 4 removable mount adapters. It can extend the VESA to 400×400 400×300 400×200 300×300 300×200 (16″x16″/16″x12″/16″x8″/12″x12″/12″x8″). Please check your TV VESA; these are square or rectangular patterns between 4 and 16 inches per side on the rear of your display. Heavy gauge steel construction provides safety loading up to 88lbs display. The high-tech look mount offers 15 degrees forward and 5 degrees backward tilt, 180 degrees of swivel and extension up to 20 inch for viewing angle and TV placement adjustment. The removable VESA plate can be taken off for easy installation.

Will the mount fit my TV?
Firstly, please check the weight of your display, it should be less than 88 lbs. Secondly, If your Monitor or TV has 4 mounting holes on the back of the screen that are 400×400 400×300 400×200 300×300 300×200 200x200mm/200×100/100×100 (16″x16″/16″x12″/16″x8″/12″x12″/12″x8″/8″x8″/8″x4″/4″x4″) apart from each other vertically and horizontally this bracket will fit. In addition, please check the area inside the 4 mounting holes to make sure there are not any plugs. Otherwise, the plate may block the plugs.
Notice: This mount fits most 25-49″ TVs (VESA 400×400/400×300/400×200/300×300/300×200/200×200/200×100/100x100mm(16×16″/16×12″/16×8″/12×12″/12×8″/8×8″/8×4″/4×4″)), some up to 50 55 inch TVs manufactured in recent 3 years

ECHOGEAR EGLF1-BK

You’re The Captain Now
Be the captain of awesome viewing angles by adjusting your TV for the optimal view from any seat in the room. Tilt, extend, and swivel to your heart’s content.
Extendable Like Mr. Fantastic
Smooth articulation from the wall makes it easy to point the TV exactly where you want it. You could even watch from a different room, if you’re into that sort of thing.
Feng Shui To The Max
With a low profile design, this mount can retract close to the wall for a modern look. Keeping your environment in harmony, and your party guests in awe.
• This full motion TV wall mount does it all. Extend out 16” and swivel 130º to give any seat in the house the perfect viewing angle. Also, this mount sits only 2.6” from the wall when packed in.
• We take pride in your time which is why we developed a 3-step installation process and a manual that is actually useful (and even funny). Installing a TV mount has never been easier
• Nervous about hanging a TV on a wall? We don’t blame you. Which is why we test all of our TV mounts to hold 4x their rated weight. This mount is rated to support 70” & 132 lbs.
• LG TV? Sony? Vizio? Samsung? Not a problem. Our hardware bags provide a wide assortment of screws to accommodate any brand of television. Have 18” or 24” studs? Check out our larger mount, the EGLF2.Simple 3-Step Install- 1) Screw the brackets to the TV 2) Bolt the wall plate to the wall 3)Attach your TV to the wall plate

Cheetah APDAM3B

CHECK IT OUT

FITS 20-65″ TV’s up to VESA 400 and 115LBS
This mount fits virtually all 20-65″ TVs sold today with VESA hole patterns from 50x50mm (2×2”) to 400x400mm (16×16″) and up to 115lbs.

14″ EXTENSION, LOW 2.7″ PROFILE, 130° SWIVEL, 10° TILT
The articulating arm extends up to 14″ from the wall yet collapses to 2.7″. The mount allows for up to 130° swivel and 10° tilt.

ALLOWS 3° ROTATION ADJUSTMENT TO LEVEL AFTER INSTALLATION
Slots in the TV plate allow for 3° of rotation adjustment to level the display after mounting.

MOUNTS TO TWO 16” WOODEN STUDS AS WELL AS ALL MASONRY
The APDAM3B can be mounted to Two standard 16” Wooden studs as well as all types of masonry. All mounting hardware is included.

10′ TWISTED VEINS HDMI CABLE AND 6” MAGNETIC BUBBLE LEVEL
The mount includes a 10’ Twisted Veins High Speed with Ethernet HDMI cable featuring 4K 60HZ 3D signal support and a protective braided jacket. A 6″ 3-axis Magnetic Bubble Level ensures level mounting.

INCLUDES ALL NECESSARY MOUNTING HARDWARE
This mount ships with hardware for both wall and TV mounting.
• Fits VESA 400 TVs up to 115lbs. Will NOT fit VESA 600 TVs even if they are 65” or less. The APDAM2B model fits VESA 600.
• The 17” wall plate fits 16” wall studs exactly. When mounted to 16” studs, no side to side on wall adjustment is possible. The TV will be centered in the middle of the studs. It will NOT fit 20” or 24” studs. The APDAM2B model fits up to 24” studs.
• This mount ships with Four sets of TV mounting screws and spacers to fit most TVs. But it does Not have screws for All TVs. However, if your TV requires different screws, Cheetah stocks hundreds of TV screw sets in the US and will ship any required screws for free.
• Even with the Wall Plate Level, the TV plate may be out of level depending on the weight distribution of your TV. Four screws in the TV plate, when loosened, allow for rotation adjustment for leveling.
• 14″ Extension, 2.7″ profile when Collapsed, 130° Swivel and 10° Tilt. Includes a 10′ Twisted Veins HDMI Cable, and a 6″ 3 Axis Magnetic Bubble Level and a Lifetime Guarantee.

Write a Reply or Comment:

− 4 = 3

Back to top
error

Enjoy this blog? Please spread the word :)