1, CRJ Blackout
Maximize the aesthetics of your build with the CRJ All Black 4 Way PWM Fan Hub. Note that only the RPM from the header labeled “”CPU”” will be reported to the motherboard, it is NOT recommended to connect the pump to this header.
• Power up to 4 PWM PC Fans from a Single 4-Pin PWM Fan Header
• Compatible with Both 3-Pin and 4-Pin PC Fans
• All Black Construction with Minimally Visible Wires
• High Quality 3M Brand Adhesive Mounting Pad on the Rear of the PCB
• Total Length (from 4-Pin PWM Connector to End of PCB): 15
2, Electop Fan Controller
lectop Chassis Fan Hub CPU Cooling
HUB 10 Port 12V 4 Pin Fan PWM Fan Hub SATA Controller
• Designed for 12V 4 Pin FAN, support simultaneous starting of 10 channel 4 Pin
fans, solving the problem of shortage of motherboard.
• Support PWM function fan automatic speed regulation.
• PWM interface is connected to CPU FAN interface on motherboard by PWM cable.
The red interface is the dedicated interface for CPU fan, these black interface
are conventional PWM fan interface.
• EVA double-sided adhesive can be used to fix the hub in the chassis.
• Size: 75 X 48 mm
• Designed for 12V 4 Pin FAN, support simultaneous starting of 10 channel 4 Pin
fans, solving the problem of shortage of motherboard.
• Support PWM function fan automatic speed regulation.
• PWM interface is connected to CPU FAN interface on motherboard by PWM cable.
The red interface is the dedicated interface for CPU fan, these black interface
are conventional PWM fan interface.
• EVA double-sided adhesive can be used to fix the hub in the chassis.
• Size: 75 X 48 mm
3, Thermaltake Commander FX
The new Thermaltake’s PWM fan hub Commander FP is capable of powering up to 10 independent PWM fans which allows users to saturate the case with fans while maintaining superb cable management. Sporting a blue LED indicator light, the Commander FP ensures the inside of your case looks just as good as the outside, making it the best choice for cooling performance enthusiasts or users seeking no-fuss installation!.
4, Kingwin FPX-001 Fan Controller
Model: FPX-001
LED Indicator for Power On/Off
Control 4 Sets of Fans
Fit 3.5-Inch Bay
3 Pin Fan Connections
5, Corsair Commander Pro
The Corsair Commander Pro grants
superior and accurate hardware control with a compact, all-in-one device. It is
fully compatible with Corsair link devices and Supports up to six fan
connectors, two internal USB 2.0 headers, four temperature inputs, and two RGB
LED channels. Accurately monitor how your system reacts when you push it to its
limits. Manage your fans without pressing knobs or switches through the
intuitive Corsair link software. Synchronize your RGB lighting effects with the
HD RGB fans, SP RGB fans and individually addressable RGB LED strips to light
up your build.
• The CORSAIR iCUE Commander PRO turns your case into a smart case, using
CORSAIR iCUE software to control up to six case fans and two RGB lighting
channels
• Powers up to six DC or PWM fans with voltage and PWM control, including the
ability to run at zero RPM for total silence
• Two RGB lighting channels provide powerful software control of CORSAIR
individually addressable RGB LED strips and CORSAIR RGB fans
• Four repositionable temperature sensors allow you to accurately monitor
temperatures throughout your system with CORSAIR iCUE software
• Two USB 2.0 internal headers allow you to easily connect internal USB
devices, such as a CORSAIR AXi Series PSU or motherboard front panel
• Set up custom fan curves and lighting profiles to automatically adjust fan
speeds and RGB lighting based on system temperatures
• Powerful CORSAIR iCUE software brings everything together, allowing you to
customize RGB lighting, monitor CPU and coolant temperatures and adjust fan
speeds, all from a single intuitive interface
• Commander PRO’s low-profile design and included adhesive backing makes it
easy to install behind your motherboard, or on any flat surface inside your
case
Write a Reply or Comment: